LED PRODUCTS

We are pleased to offer Lumilens High Powered-LED products through Axsys Automation, our local franchised distributor. For datasheets, information, or pricing on any of the below products, please call or e-mail at mjohnson@shefler-kahn.com.

Lumilens offers florescent light replacements, commercial signage lighting, in-ground lights, recessed lights, and cove lights. Applications include commercial signage, interior and exterior lighting, landscape, architectural, and decorative lighting.

FLORESCENT LIGHT T8 REPLACEMENTS - These can be installed directly into your current florescent light ballast and work with minor rewiring. They are available in 2' or 4' lengths. The 2' length tubes are 8W and available in warm white and pure white. The 4' length tubes are 15W and are available in warm white and pure white, with or without a milky white cover. Benefits include using 60% less electricity, a longer life of more than 10 times, and 95% more efficiency than the standard florescent bulb. In addition, LEDs are a green item, earth friendly!

SIGNAGE APPLICATIONS

The LumiFlex Series is a flexible LED strip that is available in single color LED or RGB that are controlled via a remote infrared controller that is programmed with 16 single colors and 4 sequences including flash and fade color changing. The LumiFlex Series also has a version that is suitable for wet location applications ; teh strip is covered by a transparent silicon tube.


	Available with Red, Green, Blue, Cool-White, Warm-White, Amber and RGB colors Available with silicon tube suitable for wet location applications Low Voltage 12VDC, easy installation For single color, 6 meters every spool ; RGB color, 3 meters every spool

The Lummus Series line is a versatile LED module to illuminate channel letters. It has a self adhesive 3M back that assures easy mounting. The string has 50 modules and can be cut at any length and be reconnected as well.

Available with Red, Green, Blue, Cool-White and Amber
Suitable for dry, damp and wet location applications
50 modules per box with 3M backing tape for easy installatio

LANDSCAPE APPLICATIONS

Available with 3, 6 and 9 LED in the fixture

AC or DC input with C/C driver built-in

DMX decoder is available (ontional feature)

10 degree spot or 20 degree flood lens

Accessory bucket is available

IGCNE-3_33_(L,H)

	Circular inground lighting, three (3) HB-LED Available with 1W or 3W HB-LED Built-in LED driver, AC full range or low voltage Wide selection of LED colors or RGB mix

IGCNE-2_63_(L,H)

	Circular inground lighting, six (6) HB-LED Available with 1W or 3W HB-LED Built-in LED driver, AC full range 100-240VAC Wide selection of LED colors

IGCNE-2_93_(L,H)

	Circular inground lighting, nine (9) HB-LED Available with 1W or 3W HB-LED Built-in LED driver, AC full range 100-240VAC Wide selection of LED colors or RGB mix

IGCNE-35_3K_(L,H)

	Circular inground lighting, three (3) K2 HB-LED Available with K2 HB-LED Built-in LED driver, AC full range 100-240VAC Wide selection of LED colors or RGB mix

IGCNE-35_6K_(L,H)

	Circular inground lighting, six (6) HB-LED Available with K2 HB-LED, 35mm lens Built-in LED driver, AC full range 100-240VAC 10 deg. spot, 20 deg. flood or 35 deg. lens Wide selection of LED colors or RGB mix

INTERIOR LIGHTING/ARCHITECTURAL APPLICATIONS

The LumiStar downlight uses a proprietary LED engine that deliver up to 650 lumens of light output. This is the perfect solution for new constructions to replace the traditional 5" or 6" incandescent downlight souce. The LumiStar consumes only 11W of power and is designed to operate for as long as 60,000 hours based on the Energy Star requirements.

Perfect replacement for 5" or 6" down light can

10W LED with 650 lumen of light output

160 Degree, wide angle illumination distribution

Available with cool-white and warm-white

The LumiStar-Retro is designed as a retrofit light source to replace PAR30 or PAR38 in the 5" or 6" down light fixtures. The unique design makes it easy to replace and no tool is required during the installation. The proprietary LED light engine in the fixture delivers a 650 lumen light output when only consume 11W of power.

Perfect retrofit for PAR30 or PAR38 in 6" downlight fixtures

10W LED with 650 lumen of light output

160 degree, wide angle illumination distribution

Available with cool-white or warm-white

Down Light Circular

DLCCV-35(S,F)K2DL

	K2 x 1 Gimbal down light Low Voltage AC or DC input with C/C driver 10 degree spot or 20 degree flood lens Case color: only available with silver

DLCCx-2(S,F)11Dx

	1W x 3 Gimbal down light Low Voltage AC or DC input with C/C driver 10 degree spot or 20 degree flood lens Various case color

DLCCx-3(S,F)33Dx

	3W x 3 Gimbal down light AC or DC input with constant current driver 10 degree spot or 20 degree flood lens Various case color

DLCCx-2(S,F)31Dx

	1W x 3 Gimbal down light AC or DC input with constant current driver 10 degree spot or 20 degree flood lens Various case color

DLCnx-3(S,F)33Dx

	3W x 3 non-swivel down light AC or DC input with constant current driver 10 degree spot or 20 degree flood lens Various case color

DLCnx-2(S,F)31Dx

	1W x 3 non-swivel down light AC or DC input with constant current driver 10 degree spot or 20 degree flood lens Various case color

Down Light Square

DLQQx-3(S,F)33Dx

	3W x 3 Gimbal down light in square face plate AC or DC input with constant current driver 10 degree spot or 20 degree flood lens Various case color

DLQQx-2(S,F)31Dx

	1W x 3 Gaibal down light in square face plate AC or DC input with constant current driver 10 degree spot or 20 degree flood lens Various case color

Cove Light

The MicroBlock ¡V series is a fully developed Solid State Lighting design with low voltage input. This design is available in a variety of lens with wide ranges of light output angles. MicroBlock is designed and sealed in an extruded aluminum case that is IP65 compliant. The unique design allows MicroBlock to be connected from 1 to 10 sets in series with a single input source. MicroBlock is available in 1-Watt or 3-Watts package and in variety of colors. MicroBlock can be mounted under the cabinet, in an aquarium, as a cove light source or many other places with limited accessibility.

Product Features:
o Low voltage input
o High Bright LED in 3-Watt or 1-Watt capacity
o Custom lens provides flat, 10 degree and 20 degree light output
o Constant Current source is required
o Compact design, IP65 compliant
o Capable of up to 10 sets in series
Various color selections are also available.